Operating Principles of the Jogler Model ILT-6000 Magnetostrictive Level Transmitter

The Jogler ILT-6000 Direct Insertion Magnetostrictive Level Transmitter is a loop powered non-contact level measurement device that can be installed directly into a process vessel. Utilizing the magnetostrictive principle and time-of-flight calculations allow the ILT-6000 to provide a fast and accurate measurement of float position and, ultimately, liquid level in the gauge. The ILT-6000 is installed in an isolation well assembly allowing the transmitter to be removed, serviced, or replaced with no process interruption.

The video below briefly explains how it operates:


ILT-6000 FEATURES
  • 2 wire, loop powered (24VDC nominal)
  • LCD Display (4-20mA, %, in, and/or cm)
  • Generic HART communication
  • Quick-Cal function for simple recalibration
  • Isolated from process pressure
  • Long Measuring Lengths (up to 35ft)
  • Isolation Well assembly
  • Dual level outputs (total level and interface)
  • Epoxy-Coated Aluminum Enclosure
  • Class I, Division 1, Groups A, B, C, D
  • Class II and Class III, Division 1, Groups E, F, G
  • Class I, Division 2, Groups A, B, C, D
  • Class II and Class III, Division 2, Groups E, F, G
  • Intrinsically Safe Class I / II / III, Division 1, Groups A, B, C, D, E, F, G
  • NEMA 4X
630-321-9646