Understanding Refraction

Refraction
This pencil appears to bend when it enters
the water because of the change in the light
ray speed as the medium changes.
Refraction is the directional change of wave propagation caused by a change in the light beams transmission medium.

Light rays travel through space in a straight line at approximately 300,000 km/s. As light passes through a transparent medium, such as water or glass, its speed is decreased.

For glass, its reduced to 200,000 kilometers per second, and for water the speed is 225,000 kilometers per second.

If the light enters into a medium perpendicular to the surface, it passes straight through but at a slower speed. However if the light beam arrives at the medium surface at an angle, not only will it speed be reduced, but it will bend due to a process called refraction.

As a beam of light reaches the surface of a medium the lower portion enters first and is slow down. However, the upper portion is still traveling at the speed of light until it arrives at the surface and enters. This speed difference at the top and bottom aspects of the light path causes it to pivot, bending toward what is referred to as the normal. This is an imaginary line drawn perpendicularly to the surface of the material.
 
Transparent materials have what is called a refractive index. This is the speed at which light travels in a medium compared to like traveling in a vacuum.
   
For example, typical glass has a refractive index of 1.33. This is calculated by dividing the speed of light in a vacuum (300,000 km/s) by the speed of light in glass (225,000 km/s).
   
The refractive index of air is 1.0003. Anytime a light beam travels from a medium with a low index of refraction, like air, to a medium with a higher index of refraction, like glass, the beam of light will bend toward the normal.
   
Likewise when the beam of light exits a highly refractive medium into a medium with the low index of refraction, the process is reversed.
   
The bottom portion of the beam of light exits first, and resumes at the speed of light, with the top portion still at the speed determined by the medium. This causes the beam to pivot away from the normal line.

Instruments used to measure the refractive index are called refractometers. Refractometers used in industrial automated systems are referred to as inline refractometers.