Happy Holidays from Alliance Technical Sales

"Christmas gift suggestions: To your enemy, forgiveness. To an opponent, tolerance. To a friend, your heart. To a customer, service. To all, charity. To every child, a good example. To yourself, respect." — Oren Arnold

What Are Direct-reading Level Gauges, Site Flow Indicators, and Specific Gravity Analyzers?

Direct-Reading Level Gauges
Direct-reading Level Gauges (Jogler)

Direct-reading Level Gauges


Direct-reading Level Gauges are the simplest, most reliable way to determine the level of liquid in a tank or vessel because they give you a direct view without compromising the integrity of your process system. Direct-Reading level gauges are installed so that the liquid level in the transparent sight tube is always the same as the liquid level inside the tank or vessel.






Sight Flow Indicators

Sight Flow Indicators
Sight Flow Indicators (Jogler)

Sight Flow Indicators are the simplest, most reliable way to observe liquid or solids flow without compromising the integrity of your piping system. They are available in either armored styles for protection in exposed locations, or lantern styles for 360-degree viewing.






Specific Gravity Analyzers (SGAs)


Specific Gravity Analyzer
Specific Gravity Analyzer (Jogler)
Specific Gravity Analyzers (SGAs) are a dependable and accurate method for measuring and sampling process liquid levels in virtually any application:
  • Acids
  • Caustics
  • Co-generation
  • Light Hydrocarbons
  • Beverages, etc.
SGAs present accurate visual verification of liquid density, can be cross-checked against temperature and are compatible with most requirements. Also, they require only small amounts of product for specific gravity measurement.


DOWNLOAD THE JOGLER LEVEL GAUGE, FLOW INDICATOR & ANALYZER BROCHURE HERE


For more information on these products, contact Alliance Technical Sales by calling 630-321-9646 or visit their web site at https://alliancets.com.

Validating Water Cycle pH Requirements Using Conductivity and Calculated pH


In thermal power plants, pH measurement and control in the water steam cycle are critical to minimizing corrosion. Cycle chemistry guidelines specifically target narrow pH ranges.

However, in high purity water and steam, there are not enough ions in the water to generate a pH response, causing the pH reading to be unstable. Fortunately, conductivity has a direct relationship with pH when the sample contains only pure water with the typical alkaline treatments, such as ammonia and amines. In fact, cycle chemistry in many plants relies primarily on the related specific conductivity values. However, correction for minor contaminants by measuring the cation conductivity of the sample is needed to provide accurate results. The specific and the cation conductivity values are used in an industry accepted calculation that provides the highest accurate conversion to pH. Under normal operating conditions, this calculation provides more accurate and reliable results than pH electrodes can provide, for two reasons:
  1. Conductivity is linear, with concentration which provides much higher resolution than pH sensors all of which give nonlinear response to concentration.
  2. Conductivity sensors can be directly calibrated with minimal introduction of error. 
All pH reference electrodes have a variable junction or diaphragm potential that can change between buffer calibration and process measurement, introducing some uncertainty to subsequent measurements.

This makes calculated pH based on conductivity significantly more accurate. However, with major contamination, such as when a condensate exchange polisher's resin is exhausted, and an acid leak occurs, the pH would drop below 7, which is outside the ideal range for using calculated pH and would generate errors. Thus, to avoid contamination, it is recommended that both traditional pH measurement, and calculated pH based on conductivity, be used for optimal pH control.

METTLER TOLEDO Thornton's M800 multi-parameter transmitter can provide traditional pH measurement, calculated pH, as well as specific and cation conductivity to ensure accurate and reliable pH control. The M800 even has a built-in alarm to alert you if the pH measurement deviates from the calculated pH measurement for extra security and peace of mind.

For more infomration about METTLER TOLEDO Process Analytics products, contact Alliance Technical Sales by calling 630-321-9646 or by visiting https://alliancets.com.

Thank You Veterans for Your Patriotism, Love of Country, and Willingness to Serve


Veterans Day is not just another holiday. It honors those Americans who fought for our freedom. By celebrating our Veterans, we continue to tell the story of how this country became the most powerful on Earth - through bravery, honor, truth, and determination.

Our Veterans are our neighbors, friends, family, and co-workers. They took an oath to defend the United States and our Constitution, from all enemies, foreign and domestic. We must never forget their bravery, service, and sacrifice.

Alliance Technical Sales thanks our Veterans, past and present, for serving our country and protecting our freedom.

No More Purge Gas Required for New Tunable Diode Lasers for Combustion Processes


A new generation of TDLs not only offers exceptional fuel costs savings, but eliminates the need for process side purge gas.


Refineries, petrochemical, fertilizer and power plants worldwide have large numbers of combustion processes in operation, from process heaters and fired heaters to package boilers and large steam turbines. Whenever a process fluid needs to be heated as part of a chemical reaction, or there is a requirement for steam generation, there will be a combustion process at its heart.

This paper presents a review of the general anatomy of a typical combustion process; describing each zone and its function, before discussing some of the challenges of combustion measurement and how modern TDL analyzers such as METTLER TOLEDO’s GPro 500 and its range of process adaptions offer many advantages over typical combustion analysis technologies.




For more information about GPro® 500 TDL, contact Alliance Technical Sales by calling 630-321-9646 or by visiting https://alliancets.com.

Proper Installation of BriskHeat XtremeFLEX Heating Tape


BriskHeat XtremeFlex heating tape is very versatile due to its superior flexibility. Although it is versatile, there can still be failures in hotspots if it's not properly installed. The purpose of this short video is to help you avoid failures and hot spots, and to help you install your heating tape for optimal performance.

Before you get started there's a few things that you should keep in mind:
  • Make sure you have these tools prior to installing the heating tape - Gloves, Heating Tape, Heat Conductive Putty, Scissors, Fiberglass Tape.
  • Be sure that the surface that you're applying the heat tape to is clean, dry, and free of burrs, oils, debris or sharp edges. 
  • Ensure that you don't overlap the heating tape onto itself leave at least an eighth of inch gap between each wrap.
You also want to ensure complete surface contact between the heating tape and the surface. Air gaps can cause hotspots which can result in premature failures to the heating tape. Use our heat conductive putty to bridge any gaps between the heating tape and the surface.  When working with heat conductive putty, wear proper personal protective equipment. Place a fair amount of putty where the transitions meet so that there will not be any air gaps when installing. With many heating tapes you will need a temperature controller device, so contact your BriskHeat Representative for assistance.

To make sure that the heat tape stays in place use briskets high-temperature fiberglass adhesive tape or high-temperature aluminum adhesive tape because it will not damage the heating tape and it can withstand the high temperature that the heating tape produces.  Use insulation on BriskHeat heating products in order to avoid heat loss.

For more information about the BriskHeat heating products, contact Alliance Technical Sales.
Phone: 630-321-9646

The Mettler Toledo GPro® 500 Series of Tunable Diode Lasers

Tunable Diode Lasers


Tunable Diode Lasers (TDLs) use a measurement technology called absorption spectroscopy: they output a beam of laser light at the same frequency that the gas to be measured absorbs light. The TDL analyzes the light after it has passed through the gas stream and calculates the quantity of the target gas in the stream. The use of TDL sensors is becoming more and more common in industrial processes.

Mettler Toledo manufactures the GPro® 500 TDL Series of Tunable Diode Laser designed for the toughest gas measurements. These analyzers are known to handle some of the most demanding process applications, particularly where accuracy and fast response is crucial.

Using a modular design, the GPro® 500 tunable diode laser gas analyzer allows you to select the process adaption that fits your application, and match it with the parameter that you need to measure. We offer sensors that measure  a variety of gases including Carbon Dioxide (CO₂), Carbon Monoxide (CO), Hydrogen Chloride (HCl), Hydrogen Sulfide (H₂S), Moisture, Ammonia (NH₃), Methane (CH₄) and Oxygen (O₂).

GPro® 500 Tunable Diode Laser - Eliminate Alignment

Most TDLs are comprised of two parts: the laser source unit and a receiving/analyzing unit. These parts must be installed directly opposite each other, which is not always easy and misaligned can often occur. METTLER TOLEDO's GPro® 500 Series solves this by combining both parts in a single unit. A probe attached to the GPro® sensor protrudes into the gas stream. A three-sided mirror at the end of the probe directs the beam back through the probe to the receiver, so alignment is always perfect.

GPro® 500 Tunable Diode Laser - Minimal Maintenance

GPro® 500The GPro® does not require "maintenance intensive" extractive and conditioning systems. This means that you receive consistent performance from your tunable diode laser gas analyzer without the downtime and cost associated with these traditional systems. You achieve reliable uptime, critical in safety applications, at a reduced cost of ownership.

For more information about the Mettler Toledo GPro® 500 Tunable Diode Laser, contact Alliance Technical Sales.
Phone: 630-321-9646
Web: https://alliancets.com