Drum Heater Applications

It is common for bulk liquids to be delivered, contained, or dispensed from large pails or drums. At various times and locations during its dwell time in a drum, inventoried liquids might need protection from freezing, or maintenance of an elevated temperature for viscosity control or another reason. It can be impractical to provide a controlled environment in which to house one or more drums, pails, or other containers. A specialized heater provides an effective and economical solution that is easy to put in place as needed.

Silicone rubber drum heaters require only electric power from an extension cord to deliver controlled heat to plastic or metal drums. They can be put in place in minutes and operate unattended to provide controlled levels of heat through the container walls to the target liquid. The units are rugged and have a self-contained thermostat. Various sizes and capacities accommodate a broad range of industrial applications. Specialized custom units can be configured for specific applications.

The short video shows the ease with which these drum heaters can be applied. Share your liquid processing and analytical challenges with fluid processing specialists, leveraging your own knowledge and experience with their product application expertise to develop effective solutions.

TOC Measurement in Water Systems

TOC analyzer for continuous on-line measurement
Image courtesy Mettler Toledo Thornton

Total Organic Carbon, referred to as TOC, is a measurement providing one of several facets to indicate the purity of a water sample or stream. Organic contamination in water for use in power generation, semiconductor manufacturing, and pharmaceutical production poses a number of operational risks or quality failures that can substantially impact process output. The elevated presence of carbon compounds in certain purified water sources can be an indicator that water treatment processes are not performing properly and need attention.

The measurement technology involves oxidation of carbon compounds in the presence of UV light and measuring sample conductivity. Processing of the raw measurement yields a value for TOC. Analytical instruments benefit from having features and attributes that lessen the need for human involvement and deliver rapid and accurate results. Mettler Toledo provides an advanced solution for TOC measurement with it 5000TOCi analyzer.

• Fast continuous measurement
• Reagent and chemical free
• Reliable operation
• ISM Intelligent Sensor Management

More detail is provided in the document below. Share your process analytic challenges with fluid process specialists. Leverage your own knowledge and experience with their product application expertise to develop effective solutions.

TOC Total Organic Carbon Analyzer from Alliance Technical Sales, Inc.

Applying Process Refractometers in Sugar Cane Processing

In-line process refractometer
Image courtesy Electron Machine Corp.

Sugar cane, after harvesting, requires processing within a limited time window to avoid sugar loss by inversion to glucose and fructose. The traditional two stage process, milling and processing, may be combined in a single modern production facility. Process refractometers can be found in both operations, making an optical measurement of a solution’s refractive index used to determine the concentration of dissolved solids.

To achieve high quality liquid and crystal sugars and contain production cost, refractometers are employed to deliver accurate in-line Brix and other measurements in the cane sugar refining and milling processes.

Specific uses of refractometers in sugar production are:

• Product flow adaptation to evaporator capacity to achieve energy savings.
• Extraction process optimization, minimizing the use of water that will need to be removed at the evaporator.
• Separation column feed juice control to adjust concentration to match capacity.
• Quality assurance check on liquid bulk sugar and molasses.
• Vacuum pan automatic and accurate seeding.
• Monitor supersaturation over complete strike of crystallization.

Share your process analytic and measurement challenges with the experts at application specialists, leveraging your own process knowledge and experience with their product application expertise to develop an effective solution.

MCE Technology for Chloride and Sulfate Analyzers

Mettler Toldeo, under their Thornton brand, employs Microfluidic Capillary Electrophoresis in the on-line measurement of chlorides and sulfates. This measurement system delivers actionable measurements of these potentially harmful water constituents, enabling timely corrective action to be taken and prevent damage to turbines and other steam utilization equipment.

The MCE technology is currently available on Thornton's 3000CS  Analyzer which provides on-line measurements every 45 minutes. The system reduces cost of ownership and provides faster results than methods requiring sampling and off-line processing.

Share your steam system and fluid analytical challenges with fluid process analytic specialists, combining your own knowledge and experience with their product application expertise to develop effective solutions.

Match the Right Temperature Sensor Configuration to the Application

Using a temperature sensor properly configured for
the application will result in enhanced process performance
Image courtesy Smart Sensors, Inc.

There are more temperature controlled operations than any of us could count in a lifetime. Each one exhibits an exclusive set of performance requirements and design challenges. Matching the means of temperature measurement, the control loop characteristics, and heat delivery method to the application are essential to achieving successful operation.

Step one is to measure the process temperature. This sounds simple until you start researching products and technologies for measuring temperature. Like the temperature controlled operations mentioned previously, there are more than you can count in a lifetime. To filter the possible candidates for temperature sensing devices, consider these aspects of your application and how well a particular sensor may fulfill your requirement.

• Response Time - How rapidly the sensor will detect a change in process temperature is a function of how the sensor is constructed and how it is installed. Most temperature sensors are enclosed or encapsulated to provide protection for the somewhat vulnerable sensing element. Greater mass surrounding the sensing element will slow sensor response. Whether the slower response time will adversely impact process operation needs to be considered. More consideration is due to the manner in which the temperature sensor assembly is installed. Not all applications involve a fluid in which the sensor assembly can be conveniently immersed, and even these applications benefit from careful sensor placement.
• Accuracy - Know what your process needs to be effective. Greater levels of accuracy will generally cost more, possibly require more care and attention to assure the accuracy is maintained. Accuracy is mostly related to the type of sensor, be it RTD, thermocouple, or another type.
• Sensitivity - Related to the construction, installation, and type of sensor, think of sensitivity as the smallest step change in process temperature that the sensor will reliably report. The needs of the process should dictate the level of sensitivity specified for the temperature sensor assembly.

Let's look at a very simple application.

Heat tracing of piping systems is a common application throughout commercial and industrial settings experiencing periods of cold weather. Electric heat trace installations benefit from having some sort of control over the energy input. This control prevents excessive heating of the piping or applying heat when none is required, a substantial energy saving effort. A temperature sensor can be installed beneath the piping's insulation layer, strapped to the pipe outer surface. One sensor design option available to improve the performance of the sensor is a surface pad. The surface pad is a metal fixture welded to the sensing end of a temperature sensor assembly. It can be flat, for surface temperature measurements, or angled for installation on a curved surface, like a pipe. The increased surface contact achieved with the surface pad promotes the conduction of heat to the sensor element from the heated pipe in our example. This serves to reduce and improve the response time of the sensor. Adding some thermally conductive paste between the pad and the pipe surface can further enhance the performance. While the illustration is simple, the concepts apply across a broad range of potential applications that do not allow immersion of the temperature assembly in a fluid.

A simple modification or addition of an option to a standard sensor assembly can deliver substantially improved measurement results in many cases. Share your temperature measurement requirements and challenges with a process measurement specialist. Leverage your own process knowledge and experience with their product application expertise.

Surface Temperature Sensors and Transmitters for Industrial Applications from Alliance Technical Sales, Inc.

Calibration of Process Instrumentation

Industrial temperature transmitter requires
periodic calibration to assure reliable performance
Image courtesy of Smart Sensors

Calibration is an essential part of keeping process measurement instrumentation delivering reliable and actionable information. All instruments utilized in process control are dependent on variables which translate from input to output. Calibration ensures the instrument is properly detecting and processing the input so that the output accurately represents a process condition. Typically, calibration involves the technician simulating an environmental condition and applying it to the measurement instrument. An input with a known quantity is introduced to the instrument, at which point the technician observes how the instrument responds, comparing instrument output to the known input signal.

Even if instruments are designed to withstand harsh physical conditions and last for long periods of time, routine calibration as defined by manufacturer, industry, and operator standards is necessary to periodically validate measurement performance. Information provided by measurement instruments is used for process control and decision making, so a difference between an instrument’s output signal and the actual process condition can impact process output or facility overall performance and safety.

In all cases, the operation of a measurement instrument should be referenced, or traceable, to a universally recognized and verified measurement standard. Maintaining the reference path between a field instrument and a recognized physical standard requires careful attention to detail and uncompromising adherence to procedure.

Instrument ranging is where a certain range of simulated input conditions are applied to an instrument and verifying that the relationship between input and output stays within a specified tolerance across the entire range of input values. Calibration and ranging differ in that calibration focuses more on whether or not the instrument is sensing the input variable accurately, whereas ranging focuses more on the instrument’s input and output. The difference is important to note because re-ranging and re-calibration are distinct procedures.

In order to calibrate an instrument correctly, a reference point is necessary. In some cases, the reference point can be produced by a portable instrument, allowing in-place calibration of a transmitter or sensor. In other cases, precisely manufactured or engineered standards exist that can be used for bench calibration. Documentation of each operation, verifying that proper procedure was followed and calibration values recorded, should be maintained on file for inspection.

As measurement instruments age, they are more susceptible to declination in stability. Any time maintenance is performed, calibration should be a required step since the calibration parameters are sourced from pre-set calibration data which allows for all the instruments in a system to function as a process control unit.

Typical calibration timetables vary depending on specifics related to equipment and use. Generally, calibration is performed at predetermined time intervals, with notable changes in instrument performance also being a reliable indicator for when an instrument may need a tune-up. A typical type of recalibration regarding the use of analog and smart instruments is the zero and span adjustment, where the zero and span values define the instrument’s specific range. Accuracy at specific input value points may also be included, if deemed significant.

The management of calibration and maintenance operations for process measurement instrumentation is a significant factor in facility and process operation. It can be performed with properly trained and equipped in-house personnel, or with the engagement of subcontractors. Calibration operations can be a significant cost center, with benefits accruing from increases in efficiency gained through the use of better calibration instrumentation that reduces task time.

Measurement of Oxygen in Processing Applications

This optical oxygen sensor is one of many oxygen
measurement devices
Image courtesy Mettler-Toledo

The measurement of oxygen is used throughout many industrial processing operations. Knowing about oxygen measurement technology can lead to better measurement performance.

Mettler-Toledo, a recognized leader in process analytical measurement technology, has authored a comprehensive guide to oxygen measurement. Some of the covered topics include:

• Theoretical background of oxygen measurement
• Calibration of oxygen sensors
• Description of oxygen measurement technologies
• Common challenges with oxygen measurements
• And more

A copy of the guide is included below. Share your process analytical requirements and challenges with measurement experts, combining your own knowledge and experience with their product application expertise to develop effective solutions. Ask for your own copy of the guide, too.

Guide to Oxygen Measurement in Industrial Process Applications from Alliance Technical Sales, Inc.